We provide independent Kaiser microwave repair in Nairobi for out-of-warranty appliances. Kaiser offers 900W freestanding microwaves and built-in combi microwave-oven units. Kaiser combi models have two separate heat systems — the microwave magnetron system and the convection oven heating system. Faults can occur on either side independently.
Common Kaiser Microwave Faults
| Fault | Likely Cause |
|---|---|
| Not heating at all | Blown high-voltage fuse (test first — cheapest fix), failed HV diode, failed magnetron. We test the full HV circuit path before recommending magnetron replacement. KES 1,500–11,000 |
| Sparking inside cavity | Damaged or burnt waveguide cover (mica plate above the magnetron). STOP using immediately — fire risk and magnetron damage will follow. ✓ KES 1,500–2,500 fix |
| Turntable not rotating | Failed turntable motor, broken drive coupler, cracked turntable ring below plate KES 2,000–4,000 |
| Door not closing properly | Failed door latch assembly, door lever, microswitch failure — appliance will not operate with a faulty latch KES 2,000–5,000 |
| No power / display blank | Blown main fuse from door interlock failure or Nairobi KPLC power surge, control board fault KES 1,500–6,000 |
| Combi not switching between modes | Control board fault, mode selector failure on built-in Kaiser combi units KES 5,000–13,000 |
| Combi oven mode not heating | Failed oven heating element or thermostat in the convection system (separate from the microwave magnetron system) KES 5,000–11,000 |
Parts We Carry
- Waveguide covers (mica plates) — most common Kaiser microwave replacement
- Magnetrons (model-specific)
- High-voltage diodes and capacitors
- Thermal and main fuses — Nairobi power surges frequently blow these
- Turntable motors
- Door latch assemblies
- Control boards for combi units (model required)
← Back to Kaiser Appliance Repair Nairobi hub
Pricing Guide — Nairobi 2026
Indicative prices. Kaiser appliances use collection-specific components — repair costs reflect premium parts. We always diagnose and quote before starting.
| Service | Estimated Cost KES | Notes |
|---|---|---|
| Waveguide cover replacement | 1,500–2,500 | Stop using immediately; fire risk |
| HV fuse + diode test and replace | 1,500–3,500 | First repair path for no-heat fault |
| Turntable motor | 2,000–4,000 | Parts + labour |
| Door latch assembly | 2,000–5,000 | Parts + labour |
| Main fuse (power surge) | 1,500–3,000 | Common after Nairobi KPLC events |
| Magnetron replacement | 5,500–11,000 | After full HV circuit confirmed faulty |
| Combi control board | 5,000–13,000 | Built-in combi models; model required |
Service Areas
Frequently Asked Questions
Stop using it immediately. Sparking is caused by a damaged waveguide cover (the mica plate above the magnetron opening). Continued use risks fire and will permanently damage the magnetron. Replacement costs KES 1,500–2,500 and is a single-visit fix. Call 0742 245720.
We test the high-voltage fuse first (cheapest component), then the HV diode, then the magnetron. This sequence prevents unnecessary expensive parts replacement. Most no-heat faults on Kaiser microwaves in Nairobi are resolved by fuse and diode replacement, not magnetron replacement. Call 0742 245720.
Kaiser combi microwaves contain two independent heat systems. If the oven mode has failed but microwave mode works, the convection heating element or thermostat has failed — not the magnetron. The model number is required for the correct element. Call 0742 245720.