We are an independent Nairobi repair company — not affiliated with Bosch Kenya. We repair out-of-warranty Bosch microwaves at your home. Bosch E-NR is required for built-in and combi models where parts vary significantly between series.
Common Bosch Microwave Faults
| Fault | Likely Cause |
|---|---|
| Not heating at all | Blown high-voltage fuse (cheapest, test first), failed magnetron diode, failed magnetron. We test the full HV circuit before assuming magnetron failure. KES 1,500–9,000 |
| Sparking inside cavity | Burnt or missing waveguide cover. STOP using immediately. ✓ KES 1,000–2,000 fix |
| Turntable not rotating | Turntable motor, drive coupler, turntable ring KES 1,500–3,500 |
| Door not closing | Door latch, door lever, microswitch failure KES 1,500–4,000 |
| No power / display blank | Blown main fuse (often from door interlock failure or Nairobi power surge) KES 1,000–5,000 |
| Bosch combi — not switching modes | Control board fault, mode selector failure KES 4,000–11,000 |
| Bosch combi — oven mode not heating | Oven heating element failure (combi models have two separate heat systems) KES 4,000–9,000 |
Bosch Microwave Series We Service
Never open a microwave yourself. The internal capacitor holds a lethal charge even after unplugging. Our technicians discharge the capacitor using the correct procedure before any internal access.
Parts We Carry
- Waveguide covers (mica plates) — most common Bosch microwave part replacement in Nairobi
- Magnetrons — for no-heat fault after fuse and diode are confirmed good
- High-voltage diodes — part of the HV circuit powering the magnetron
- Thermal and main fuses — Nairobi power surges frequently blow microwave fuses
- Turntable motors — for turntable rotation fault
- Door latch assemblies — prevents machine from starting with faulty door
- Control boards — for combi mode and display faults
Pricing Guide — Nairobi 2026
Indicative prices only. We always diagnose first and provide a clear quote before starting any repair. Bosch E-NR required for accurate parts sourcing.
| Service | Estimated Cost KES | Notes |
|---|---|---|
| Waveguide cover replacement | 1,000–2,000 | Stop using until replaced |
| High-voltage fuse + diode | 1,500–3,000 | Often resolves no-heat fault |
| Turntable motor | 1,500–3,500 | Parts + labour |
| Door latch assembly | 1,500–4,000 | Parts + labour |
| Main fuse replacement | 1,000–2,500 | Often power-surge related |
| Magnetron replacement | 4,500–9,000 | E-NR required for correct magnetron |
| Control board (combi) | 4,000–11,000 | E-NR required |
Nairobi Service Areas
Frequently Asked Questions
Yes — stop using it immediately. Sparking is caused by a burnt waveguide cover. Continued use risks fire and magnetron damage. Replacement costs KES 1,000–2,000 and is a single-visit fix. Call 0742 245720.
Most common causes in order: blown high-voltage fuse (cheapest fix), then a failed diode, then a failed magnetron (most expensive). We test the full HV circuit before recommending magnetron replacement. Call 0742 245720.
Yes — especially for Bosch combi models. The BFL, BEL and other built-in series use different control boards, magnetrons and heating elements. The E-NR on the rating plate (usually inside the door frame) is required to source the correct parts. Send a WhatsApp photo to 0742 245720.